In comparison to other products currently on the market ZEISS's Optical CMM Inspection Provides a Higher Level of Flexibility from Hazel's blog



MAPLE GROVE, Minn., Aug. During the International Manufacturing Technology Show (IMTS), which will be held in Chicago from September 10-15, the brand new ZEISS DotScan chromatic-confocal white light sensor will be demonstrated on the O-INSPECT coordinate measuring machine (CMM).


The individual who is responsible for performing the scanning now has the ability to select between a regulated mode and an unregulated mode according to their preferences thanks to the assistance of this cutting-edge chromatic-confocal white light sensor. This is due to the fact that the manufacturing process can cause dimensions that are inconsistent with one another, which is why this is the case. Because of this, things are the way they currently are. When using regulated scanning, the ZEISS DotScan always actively aligns itself with the center of the measuring range automatically, which enables it to capture all of the surface points on a component. Regulated scanning is used. There is also the use of regulated scanning.

The non-contact scanning capabilities of the ZEISS DotScan enable operators to use the ZEISS O-INSPECT's 4th axis rotary table to its full potential, cmm inspection services thereby expanding the range of applications for which it can be used beyond the realm of tactile sensor applications. This allows the ZEISS O-INSPECT to be used to its full potential. Because of this, the ZEISS O-INSPECT can be utilized to the best of its abilities.

When it is necessary to do so, the ZEISS DotScan sensor can be removed from the device in a manner that is both speedy and uncomplicated, and then it can be replaced with a brand new one. This not only helps save a considerable amount of time, but it also increases the device's overall flexibility, which is a significant benefit. In other words, it's a win-win situation. This is done so that it can accommodate a wide variety of ranging values for the measurements that are taken. This is done so that it can accommodate a wide variety of ranging values. An interface that enables the utilization of the new sensor will be incorporated as a standard component in all brand-new ZEISS O-INSPECT multisensor measuring machine systems beginning in the month of November 2018, 2018. In the year 2018, this will take place.

ZEISS is an industry-leading technology company that is active on a global scale and places a primary emphasis on the fields of optics and optoelectronics in its research and development activities. The ZEISS business spans the entire planet. Since the company was founded in the year 1888, its headquarters have been continuously located in Germany. This has been the case since the beginning of the organization. The ZEISS Group is well-known for manufacturing a wide variety of products, some of which include but are not limited to the following: measuring technology, microscopes, medical technology, eyeglass lenses, camera and cinema lenses, and equipment for the production of semiconductors. The ZEISS Group is well-known for the wide variety of products that it has been able to manufacture over the years, including measuring technology, microscopes, medical technology, and eyeglass lenses. The company is continually contributing to the development of new technologies as well as the advancement of optics through the use of its products. Optical advancements are also being made. As a result of the fact that the company's products are being utilized in the aforementioned endeavors, the company is making a contribution to the advancement of the aforementioned technologies. Research and Quality Technology, Medical Technology, Vision Care/Consumer Products, and Semiconductor Manufacturing Technology are the company's four distinct business divisions, each of which is referred to by its own name.

The company is structured with this business division organizational model. The ZEISS Group operates more than 50 sales and cmm services locations, more than 30 manufacturing sites, and approximately 25 research and development centers across the globe in various regions.

During the 2016–2017 fiscal year, the organization had approximately 27,000 employees and generated approximately €5.3 billion in revenue. When the company was just getting its start, the founders chose to establish their headquarters in Jena. The day-to-day operations of the ZEISS Group are supervised and directed by Carl Zeiss AG, which also acts as the holding company for the strategic management of the ZEISS Group. Carl Zeiss AG is responsible for the overall management of the ZEISS Group.1856 was the year that saw the launch of the company for the first time. These include coordinate measuring machines (CMMs), optical and multisensor systems, and software for metrology that is used in industries such as the production of automobiles and aircraft, mechanical engineering, the production of plastics, and medical technology. Other examples of industries that utilize these technologies include the aerospace industry. The aerospace industry is another sector that is a good example of an industry that makes use of these technologies. The product catalog has been brought up to date to include cutting-edge inspection strategies that make use of cutting-edge technologies like 3D X-ray metrology, for example. These methods and technologies are broken down into even more specific categories down below.

This was done in order to provide a more in-depth selection of available choices to the customer. This is accomplished by locating the company's various measuring houses and competence centers according to a strategic positioning plan in close proximity to the company's various clientele. The primary office of the Industrial Metrology business group and the location where the group's operations are managed are both located in the city of Oberkochen, which also serves as the headquarters for the organization. In addition to Germany, production and research and development facilities can also be found in the cities of Shanghai, China, and Bangalore, India. Both of these cities are located in Asia. These two cities are not located in Germany nor are they found anywhere else in the world. The Research and Quality Technology division is in charge of completing the tasks that have been delegated to it by the business group because it is already responsible for the responsibilities associated with those tasks. The business group assigned those tasks to the Research and Quality Technology division. In addition, when the industry was at the height of its success, it was responsible for the employment of approximately 6,300 people.




Previous post     
     Blog home

The Wall

No comments
You need to sign in to comment


By Hazel
Added Jan 17, 11:01PM



Your rate:
Total: (0 rates)